CPU

 NetSilicon NET+ 50
  - 32-bit ARM7TDMI RISC Processor
  - Integrated 10/100 Ethernet MAC
  - 44MHz
  - BGA Package

 SubCPU
(not on iT-10)

 NEC 78K0 Controller
  - 8-BIT SINGLE-CHIP MICROCONTROLLER
  - 5.0-MHz operation with main system
  - 32.768-kHz operation subsystem clock
  - LQFP package

 Display

 Base Model, 2.8" diagonal, 128(W) x 64(H) dots.
 Liquid crystal display (BLUE LED backlight LCD).
 Operating temperature: -20°C ~ 70°C

 Keypad

 4 Function Keys
 12 Numeric keys (not available on  iT-10)

 Network

 10/100BaseT Ethernet® port, RJ45

 Input/Output
(not on iT-10)

 4 inputs and 4 outputs (TTL level), to control optional board.

 Internal
 Reader

 Magnetic reader DATA/CLOCK for: [Neuron C21001 dual track reader] Track-2 magnetic card stripe reader. The card can be swiped in both directions, up and down. The sensor is placed at the inner side. Custom C/D is  supported on internal reader. Card detect sensor can be used.
  - ANSI Track 2 default
  - ANSI Track 3 and 1 optional
  - JIS II

Wiegand for proximity reader
All wiegand formats are configurable by script

Serial F2F for barcode reader. Opticon; LBSAM12. The barcode reader can be visible-red or infrared type. The card can be swiped in both directions. Supported formats:
  - Interleaved 2 of 5 (ITF)
  - Code 3 of 9
  - NW-7  (Check digits are included)

 Buzzer

 3 Buzzers, no sound adjustment.

 Led's
(not on iT-10)

 6 LED's, 2 LED's standard on board (OK,Error) and 4 additional external reader LED's can be controlled. The LED's and buzzers are controlled by subCPU 78K0.

 External
 Reader

 Power:Depends on supplied P/S
          100mA@5V(Directly from main PCB)
          5V< and <24VDC (Directly from applied P/S)

 IN: DATA/CLOCK (most magnetic readers)
      Serial F2F (most barcode readers).
      Wiegand (DATA0, DATA1, most proximity readers)

 Out: Buzzer
        Led 1-2
 Connection: Screw connector

 Serial ports

 2 ASYNC Serial PORT extension (RXDB, TXDB) on TTL (5V) level
 1 Port for communication
 1 Port for reader extensions

 Clock
 Accuracy
(not on iT-10)

 +/- 3 seconds per week (at ambient temperature 25 ±5°C)
 Use NEC 78K0 controller

 Battery
(not on iT-10)

 Lithium battery. Used for RTC, backup is done in Flash.

 Memory

 16Mbyte SDRAM
 4Mbyte FLASH, (or 8 MB on iT-60 serie)

 Operating
 System

 ThreadX
 

 Debugging

 ARM® JTAG ICE Port

 Communication
 Protocol

 XML based (HTTP), based on Amano's UDF specifications

 Power

 In: 5VDC on Net-X board.
 Please refer to the document 'Terminal power supply' for more details.

 Operating
 Temperature

 0° C ~ 45° C (Depends on reader)
  - Barcode: 0°C ~ 50°C
  - Magnetic: -10°C ~ 50°C
  - Proximity: -30°C ~ 65°C

 Storage
 Temperature

 -20°C ~ 50°C

 Humidity

 10%-Max 90%

 IC Card
 Reader

 Fingerprint

  - Pressure sensitive type
  - Sensor Maker: BMF, Type: BLP100
  - 256 x 384 dots, effective area; 16 x 23,4 mm
  - Dot pitch 0,058 x 0,058 mm
  - Interface, CMOS serial 
  - 400 mA, 5VDC±10%
  - 10°C ~ 70°C

 Power

  - PS1 board 2: 100VAC-240VAC in - 5VDC out
  - PS2 board 1: 8-25VAC or 8-30VDC in - 5VDC out
  - PS3 board 4: 9-36VDC in - 5 and 12VDC out  [DC/DC converter]

 Internal
 modem

  - Speed: 56 kbps
  - Country approval: USA, FCC
   [Europe, requires approval by agencies of the countries where modem
   is offered (contact R&TTE directive)].
  - Connect to the serial connector.

 RS232
 board

  - Connected to the serial port. (For service)
  - RJ11
  - Half & full duplex

 RS485
 board

  - Connected to the serial port.
  - RJ45
  - Half & full duplex

 I/O board

 The standard I/O board on TTL level:
  - 2 Inputs, optic-isolated 5 ~ 24VDC In 
  - 2 Outputs [Common, Normal Open OR Normal Closed], dry  Contact 
    outputs for connection to A class circuit, 2A@30VDC Max (DPDT)
  - Approvals: UL, CSA, VDE (CE-marking requirements)

 Safety
 Standard

 UL1950, EN60950 and CB attestation based on IEC60950

 EMC
 Standard

 FFC part15, EN55022, EN61000-3 series, EN61000-4 series and CB        
 attestation based on IEC55022.